beacon roofing supply Denver: 303-322-9009 Ft. Collins: 970-484-5557 Salt Lake: 801-410-4345
Search
Generic filters
Exact matches only

beacon pro plus online

Aquafin Waterproofing & Protective Coatings

Aquafin waterproofing has been helping building professionals solve their toughest waterproofing challenges for over 30 years. A premier manufacturer of high-performance products for commercial, industrial, and residential applications, their full system solutions include waterproof and protective coatings, repair mortars, topically applied moisture vapor mitigation systems, and chemical injection grouts. Aquafin delivers quality on all levels, from product innovation and manufacturing to system versatility, sustainability, ease of use, and technical support.

ASK ProCoat About
Aquafin Waterproofing

Aquafin Waterproofing and Protective Coatings

Waterproofing from Aquafin, Inc. offers a trusted solution for negative and positive side structures, foundations, tunnels, potable water tanks, wastewater treatment, and more.

Cementitious Waterproofing

AQUAFIN-1K
This single-component, cement-based, polymer-modified waterproofing coating consists of well-graded quartz, Portland cement, and polymer-enhanced additives. It imparts dense, rigid, freeze/thaw resistant protection. NSF/ANSI certified for use with potable water, AQUAFIN-1K resists strong hydrostatic pressure while allowing concrete to breathe. It is safe for use indoors or out, above or below-grade, positive or negative-side, even over damp substrates.

AQUAFIN-2K/M
AQUAFIN-2K/M is a technologically-advanced, flexible cementitious waterproof coating and protective membrane. This self-curing, solvent-free, two-component powder and liquid formula features an acrylic emulsion. It is asbestos-free and resistant to water and mild abrasion. NSF/ANSI certified for use with potable water, AQUAFIN-2K/M resists strong positive side hydrostatic pressure. This unique formulation allows concrete to breathe while serving as an active barrier against carbon dioxide. It is compatible with a variety of uses above and below-grade, including horizontal, vertical, and overhead surfaces, on new or existing foundations, and over damp concrete.

Crystalline Waterproofing

AQUAFIN-IC (IntegraCoat)
AQUAFIN-IC state-of-the-art crystalline waterproofing slurry penetrates deeply into concrete. Chloride-free, zero-VOC, non-toxic, and environmentally friendly, it is NSF/ANSI certified for use with potable water, resisting strong hydrostatic pressure. Easy to use, it requires only water for mixing and can be applied to damp/green concrete. This cost-effective formula remains permanently active, protecting concrete against fresh and saltwater, wastewater, and aggressive groundwater. It chemically reacts with moisture and free lime to reduce the absorptive capacity of the cement matrix within the concrete, forming nano-scale crystals anytime water is present in the capillary system, which block the passage of water. Because it is not a vapor barrier, it allows concrete to breathe. Ideal for negative or positive side waterproofing, and for sealing shrinkage cracks up to 0.4 mm.

AQUAFIN-IC-ADMIX
AQUAFIN-IC-ADMIX is less costly than traditional waterproofing methods. The unique chemistry of this crystalline waterproofing admixture chemically reacts with moisture and free lime to reduce the absorptive capacity of the cement matrix within the concrete, forming nano-scale crystals anytime water is present in the capillary system, which block the passage of water. Add to concrete mixtures at the time of batching, or on-site to a ready-mix truck with full mixing capacity. Admixture causes negligible interference with water reducers, plasticizers, or with slump/air entrainment. Available in liquid and powder form, this cost-effective formula remains permanently active, protecting concrete against fresh and saltwater, wastewater, and aggressive groundwater. Chloride-free, zero-VOC, non-toxic, and environmentally friendly, it is NSF/ANSI certified for use with potable water, resisting strong hydrostatic pressure.

Waterstop-GunGrade
This solvent-free, single-component hydrophilic waterstop for sealing joint and pipe penetrations works with smooth and highly irregular joints, curing and expanding more than 200% in the presence of water. Easily applied with a caulking gun, it offers excellent adhesion to concrete, PVC, HDPE, steel, and fiberglass. Can be applied to wet/submerged surfaces when concrete is poured within two hours.

Waterstop-Strip
Waterstop hydrophilic swelling rubber strips are ideal for use with cast-in-place concrete construction joints, and steel, PVC, and concrete pipe penetrations of 1/8-inch or more. Rapidly expanding with exposure to water, these bentonite-free seals remain dimensionally stable, even at high temperatures, creating a compression seal that stops water infiltration. Best used where limited/no movement is expected. Works with fresh or saltwater, reproducing swelling after wet/dry cycling.

InjectProECO-LV
Stop active leaks in cracks with this high-performance, environmentally-friendly, VOC and phthalate-free closed-cell, hydrophobic polyurethane injection grout. This flexible grout system is the solution of choice for gushing, high-flow water leaks. Once in contact with water, InjectProECO-LV expands up to 800%, curing rapidly to form a tough, flexible foam. It remains unaffected by wet/dry cycles or corrosive environments. This two-component system includes a base resin and accelerator, allowing for adjustable set times and temperature stability down to -40°F.

InjectPro-Hose Kit
The InjectPro-Hose Kit allows for the easy creation of channels for acrylate/polyurethane chemical grout injections. Once concrete cures, simply inject hoses with the appropriate InjectPro grout, opening cracks fully before permanent sealing. No drilling required.

Fluid Applied Rubber Membrane

ELASTOSEAL (Trowel-Grade)
ELASTOSEAL is a one-component, ready-to-use, fast-setting, zero-VOC, cold fluid-applied modified-asphalt formula. It imparts a self-healing, seamless, rubber-like elastomeric membrane for creating cants in wall/floor joints and detailing cracks. This formula is chemical-resistant and safe for use where solvents and heat are prohibited. An ideal solution for below-grade and sandwich-slab construction, containment tanks, and more.

ELASTOSEAL (Roller/Brush)
This ready-to-use, fast-setting, zero-VOC cold fluid-applied modified-asphalt formula imparts a seamless, rubber-like membrane. Self-healing, it is designed for one-coat protection and elastomeric performance, offering 1,200% elongation. It is chemical-resistant and safe for use where solvents and heat are prohibited. Another excellent solution for below-grade and sandwich-slab construction, containment tanks, and more.

Traffic Coatings

The PRO-Tekt Traffic Deck System is a fully elastomeric system designed for use on parking decks, ramps, pedestrian bridges, and roof decks, featuring four integral components:

VAPORTIGHT COAT
VAPORTIGHT COAT SG2 and SG4 are two-component, chemically-enhanced epoxy base coats that work as a primer for the PRO-Tekt Traffic Deck System. These formulations reduce the passage of moisture vapor and water through slabs and walls, preventing capillary infiltration of oil and ground chemicals. Talk to a ProCoat expert to determine the best formulation for your application.

PRO-Tekt Flexcoat
The basecoat in the PRO-Tekt Traffic Deck System, this two-component, solvent-free, low odor, 100% solids, hybrid polyurea/polyurethane basecoat offers fully elastomeric waterproofing protection. It cures quickly to concrete, delivering excellent adhesion, imparting high tensile strength and superior elongation for crack bridging.

PRO-Tekt Trafficoat
The intermediate coat for the PRO-Tekt Traffic Deck System, this two-component, solvent-free, low odor, 100% solids, polyurethane coating offers fully elastomeric protection. Designed for use with the PRO-Tekt Flexcoat waterproofing membrane, PRO-Tekt Trafficoat is compatible for use with a variety of aggregate sizes to improve traction on pedestrian surfaces. It cures quickly, even in cold temperatures, providing excellent flexibility.

PRO-Tekt Topcoat PA
The topcoat for the PRO-Tekt Traffic Deck System, this two-component, zero-VOC, low odor, solvent-free, 100% solids, high-performance aliphatic, polyaspartic and polyurea coating is designed to withstand pedestrian and vehicular traffic. UV stable, it offers a quick return to service and high abrasion resistance. In addition to pedestrian surfaces, it is also compatible for use in airplane hangars, industrial and pharmaceutical facilities, mechanical rooms, and on freezer floors.

Construction Joints & Details

AQUAFIN CRACK SEALING TAPE
Seal cracks in concrete before applying a waterproof coating with AQUAFIN CRACK SEALING TAPE. Fast and easy to install, this highly tear-resistant, elastomeric, UV stable tape made from a polyester fabric with PVC elastomer coating is permanently flexible, resisting oils, grease, and solvents, and guarding against decomposition.

AQUAFIN JOINT SEALING TAPE-2000
Stop the passage of moisture and water through static construction joints and cracks with this elastomeric, highly tear-resistant waterproofing tape. Quick and easy to install, it offers NSF/ANSI 61 approved protection for a variety of water storage and below-grade applications.

AQUAFIN JOINT SEALING TAPE-2000-S
This state-of-the-art joint sealing tape is specially designed for concrete water structures, stopping moisture and water infiltration through expansion/control joints and cracks. It is NSF/ANSI 61 potable water approved when used with AQUAFIN-2K/M.

SEALING GASKET-18”/18”
An elastomeric, tear-resistant gasket for preventing the passage of moisture and water surrounding pipe penetrations. It can be applied quickly and easily to substrates treated with AQUAFIN-2K/M, exposed to positive-side pressure, or covered in ceramic tiles. It remains permanently flexible, resisting hydrostatic pressure. Breathable, it speeds the drying of water-based tile mortar and waterproofing materials.

Waterstop-GunGrade
This solvent-free, single-component hydrophilic waterstop for sealing joint and pipe penetrations works with smooth and highly irregular joints, curing and expanding more than 200% in the presence of water. Easily applied with a caulking gun, it offers excellent adhesion to concrete, PVC, HDPE, steel, and fiberglass. Can be applied to wet/submerged surfaces when concrete is poured within two hours.

Waterstop-Strip
Waterstop hydrophilic swelling rubber strips are ideal for use with cast-in-place concrete construction joints, and steel, PVC, and concrete pipe penetrations of 1/8-inch or more. Rapidly expanding with exposure to water, these bentonite-free seals remain dimensionally stable, even at high temperatures, creating a compression seal that stops water infiltration. Best used where limited/no movement is expected. Works with fresh or saltwater, reproducing swelling after wet/dry cycling.

Peristaltic Spray Pumps

Carrousel Heavy Duty Spray Pump
The Quikspray Carrousel Heavy Duty Spray Pump can run dry indefinitely without incurring any damage to equipment, eliminating technician error. Durable and easy to maintain, it has no moving parts, operating by the peristaltic (squeeze) principle.

Protect your structure with high-performance Aquafin waterproofing products. Contact a ProCoat Systems building supplies expert today.

Contact ProCoat about Waterproofing Products

Procoat Waterproofing productsr
 

Our Other Waterproofing Brands

Privacy Policy & Cookie Notice | Terms of Use | Terms and Conditions of Sale

Copyright © 2020 - Beacon Roofing Supply, Inc. - All Rights Reserved.