Henry Commercial Waterproofing
Move forward with confidence with Henry Commercial Waterproofing Products from ProCoat Systems. Henry offers a range of residential and commercial waterproofing solutions for roof, foundation, and below-grade applications to prevent water infiltration through the building envelope. Henry products are easy to select and install, from fluid-applied and self-adhered membranes to kraft paper, drainage boards, tape, and sealants, helping you guard against degradation to ensure a lasting, energy-efficient building design.
Henry Commercial Waterproofing Solutions
Prevent water infiltration with Henry’s impressive line of high-performance, cost-effective commercial waterproofing solutions.
Henry Cold Fluid-Applied Waterproofing
Henry Pumadeq System
The Henry Pumadeq System features a unique formulation with exceptional flexibility and durability, including superior crack bridging at low temperatures without reinforcement. This solvent-free, no-VOC, cold fluid-applied, seamless, monolithic system uses PUMA technology, combining methyl methacrylates and polyurethane. UV-resistant, Pumadeq sets in just 30 minutes, and is ready for traffic in just one hour, providing lasting performance.
Henry Prodeq System
Speed up your construction schedule with the Henry Prodeq system. This no-VOC, instant-setting, seamless membrane requires no protection board or root barrier, reducing material and labor costs. Manages complex designs with ease without welds, laps, or flashing. Durable and robust, it can withstand the traffic of heavy-duty vehicles. A comprehensive waterproofing solution for split-slab construction, plaza decks, roofs, green roofs, and terraces, with an unsurpassed warranty.
Henry CM100 is a high-build, fast-curing, one-component, solvent-free, elastomeric, cold fluid-applied waterproofing and roofing system. Apply single or two-ply as an alternative to hot mop, felt ply, and pre-formed sheeting system. Moisture curing, it provides a seamless, heavy-duty, impervious rubber-like membrane with excellent adhesion on most surfaces, including damp/green concrete. Excellent for hard to reach applications.
This one-component elastomeric waterproofing membrane is applied via trowel or spray in single or reinforced application. Ideal for cold weather applications, it cures through solvent evaporation, imparting a seamless, heavy-duty, impervious rubber-like membrane.
Aqua-Bloc WB is a water-based, low-VOC, elastomeric, liquid-applied, emulsified asphalt membrane for the below-grade waterproofing of foundation walls, ICFs, and other structures. It provides excellent adhesion to most surfaces, including damp/green concrete, remaining flexible and bridging cracks over a wide temperature range.
A quick-setting elastomeric, emulsified asphalt membrane for waterproofing foundation walls, concrete block, and ICFs. Applied with compatible spray equipment, this low odor, low-VOC formula achieves an immediate set through. Perfect for projects requiring a speedy backfilling.
Aqua-Bloc 2P Internal Setting Liquid Membrane & Insulation Adhesive
Aqua-Bloc 2P is a two-part, 100% solids, self-leveling liquid membrane designed for the repair, leveling, and waterproofing of rough or uneven concrete surfaces. It cures to a smooth, rubber-like finish, and is great for use under Blueskin WP200, or for a level surface beneath self-adhering Duratac products.
Henry Hot Rubberized Asphalt
Henry 790-11 Hot Rubberized Asphalt
This environmentally-friendly, fluid asphalt is formulated to provide a monolithic, fully bonded waterproofing membrane, restricting lateral water movement. This time-tested blend of specially selected refined asphalts, synthetic rubber, and mineral stabilizers is modified with additives, providing excellent adhesion and low-temperature flexibility. Ideal for use with intensive/extensive vegetative roofing.
Henry 790-11 EV Hot Rubberized Asphalt
The benefits of 790-11 EV, formulated with a minimum of 25% recycled material.
Henry Self-Adhered Waterproofing Membranes
Blueskin WP 200
Blueskin WP 200 is a self-adhering composite membrane featuring an SBS rubberized asphalt layer integrally laminated to a blue HDPE film. This high-performance waterproof barrier fully adheres, preventing lateral water movement, and retains flexibility at low temperatures. It is easily applied, no flame required.
Henry Vegetative Roof Assembly (VRA)
Green roof assemblies from Henry deliver proven performance, using industry-leading, sustainable technology, backed by an industry-leading warranty. Talk to a ProCoat product specialist to learn more about Henry’s extensive line of VRA products.
Henry 785 Asphalt Emulsion
Henry 785 is a solvent-free, trowel-grade damp-proofing formula featuring a heavy-bodied emulsion of asphalt, bentonite clay, cellulose fibers, and water. It is designed for use on the exterior side of below-grade foundations and walls, on the exterior of above-grade walls for breathable moisture protection, or damp-proofing exterior walls in cavity wall construction. Also excellent for planters. This formula fights corrosion, and will not crack, run, or sag. Safe for use on green/damp surfaces.
Henry 787 Elastomeric Fluid-Applied Waterproofing Membrane
This single-component, cold-applied rubberized asphalt emulsion cures to form a seamless, heavy-duty, rubber-like membrane. Ideal for waterproofing or damp-proofing concrete and masonry above and below-grade, or as a premium coating on CMU foundation walls. It adheres well to most construction surfaces, retaining flexibility over a wide temperature range. It is known for its high solids content and excellent workability. Applies by trowel, brush, or spray.
Henry 788 Asphalt Emulsion
Use this cold-applied, solvent-free trowel-grade damp-proofing formula on the exterior side of below-grade foundations and walls, on the exterior of above-grade walls for breathable moisture protection, or damp-proofing exterior walls in cavity wall construction. Also excellent for planters. Made of elected asphalt emulsified with bentonite clay and water, it is safe for use on green/damp surfaces. This formula fights corrosion, and will not crack, run, or sag.
Henry 789 Fibered Asphalt Emulsion
Use this cold-applied, solvent-free damp-proofing formula on the exterior side of below-grade foundations and walls, on the exterior of above-grade walls for breathable moisture protection, or damp-proofing exterior walls in cavity wall construction. Made of elected asphalt emulsified with bentonite clay, non-asbestos fibers for strength, and water, this formula will not crack, sag. It is safe for use on green/damp surfaces and fights corrosion.
Henry 101 Non-Fibered Foundation Coating
Henry 101 is a cold-applied, non-fibered coating for commercial and residential foundations specially formulated for damp-proofing thoroughly dry above and below-grade exterior concrete and masonry walls.
Henry 793 Premium Foundation Coating
This multipurpose, cold-applied, trowel-grade formula is designed for damp-proofing the exterior surface of below-grade foundations and walls. Resilient, it will not crack, sag, or run.
Henry 794 Premium Foundation Coating
Brush-grade, this multi-purpose, ready-to-use, fibrated, solvent-based asphaltic foundation coating firmly bonds to clean, cured concrete, providing flexible, continuous vapor-resistance on the exterior surface of below-grade concrete, block, and masonry. Also guards metal surfaces against corrosion.
Henry 795 Premium Foundation Coating
Spray-grade, this multi-purpose, ready-to-use, fibrated, solvent-based asphaltic foundation coating firmly bonds to clean, cured concrete, providing flexible, continuous vapor-resistance on the exterior surface of below-grade concrete, block, and masonry. Also guards metal surfaces against corrosion.
Henry Waterproofing Accessories
Ensure seamless waterproofing protection with compatible Henry waterproofing accessories:
- Sealants & adhesives
Henry Residential & Light Commercial Waterproofing Solutions
Enhance the performance of your building envelope with Henry foundation and below-grade waterproofing products for residential and light commercial applications.
Blueskin WP 200
Blueskin WP 200 is a self-adhering composite membrane featuring an SBS rubberized asphalt layer integrally laminated to a blue HDPE film. This high-performance waterproof barrier fully adheres, preventing lateral water movement, and retaining flexibility at low temperatures. It is easily applied, no flame required.
Moistop Ultra 10
Made from ISO-certified virgin resins using a specialized manufacturing process, the high tensile strength and puncture resistance of Moistop Ultra 10 outperforms the thickest of membranes. Featuring a water vapor permeance of 0.2 perms, it exceeds ASTM E-1745-97 Class A, B, and C requirements for under-slab vapor retarders, imparting superior waterproofing protection at a comparatively low installed cost. Moistop Ultra 10 delivers lasting protection, withstanding the most rugged job site conditions and even degradation from burial.
Moistop Ultra 15
The new standard for concrete under-slab applications, Moistop Ultra 15 outperforms even the thickest membranes. Made from ISO-certified virgin resins using a specialized manufacturing process, the high tensile strength and puncture resistance of Moistop Ultra 15 imparts superior waterproofing protection at a comparatively low installed cost. Featuring a water vapor permeance of 0.1 perms, it exceeds ASTM E-1745-97 Class A, B, and C requirements for under-slab vapor retarders. It delivers lasting protection, withstanding the most rugged job site conditions and even degradation from burial.
Quickly seal around pipes, conduit, and penetrations up to 12 inches in diameter with The Boot. The Boot is made from Moistop Ultra 15, ensuring compatibility for a durable, rock solid installation.
Ensure tight joints and seamless protection with Henry Moistop tape. Designed for polyolefin and polyethylene splicing, it seals protrusions in under-slab barriers, adhering quickly to difficult-to-bond surfaces over a wide temperatures range. Four-inch width tape tears easily for rapid installation. For use with Moistop Ultra 10, 15, and The Boot.
- Orange Label Sisalkraft
Add strength and durability to your curing and packaging project with premium Orange Label Sisalkraft paper, featuring two layers of premium quality wet strength kraft paper with tri-directional reinforcing fibers embedded in high-grade asphalt.
Ensure the uniform wet curing of concrete with Fortikure craft paper. Affordable and easy to install, it features two-layers of wet-strength kraft laminated with a non-staining hot-melt adhesive to withhold moisture and slow the curing process, imparting added strength.
Henry Drain Board (DB)
Enhance the performance of your roofing and waterproofing system with Henry DB. High flow capacity Henry DB is more cost-effective to install than other drainage systems. Featuring a polystyrene or PVC core combined with polypropylene fabric, Henry DB has a very high compressive strength and excellent chemical and tear-resistance for lasting performance. For softer waterproofing systems, polymeric film may be attached for added protection.
From commercial to residential designs, Henry commercial waterproofing products will keep you sheltered from the storm. Talk to a ProCoat Systems building supplies specialist about Henry commercial waterproofing systems today.
Contact ProCoat about Waterproofing Products