Tremco Commercial Waterproofing Systems & Sealants
A leader in the construction industry, Tremco Commercial Waterproofing Systems & Sealants can help you solve your most difficult building challenges, ensuring peace of mind with a long-lasting, leak-free structure. For over 90 years, Tremco has provided high-performance, cutting-edge building envelope solutions to architects, contractors, and building owners across the globe.
Tremco offers a variety of commercial waterproofing solutions for a diverse range of applications, with products designed for simplified, speedy installation. You can count on their innovative waterproofing formulas to help you achieve sustainable, high-performance building designs that will deliver low life-cycle costs for decades to come.
ProCoat carries an expansive lineup of Tremco waterproofing products, including:
Tremco Cold Fluid-Applied Commercial Waterproofing Systems
Tremco cold fluid-applied, modified polyurethane waterproofing solutions are designed for vertical and horizontal applications. They are also compatible for use in split-slab and back-filled wall applications when used with TREMDrain components.
For those not pressed for time, TREMproof 201/60 is an economical choice. This formula is a one-part, cold fluid-applied, VOC-compliant moisture-curing elastomer featuring high solids. It is compatible for use with split slab applications with TREMDrain system components. It is available in three formulas for self-leveling, roller, and trowel application.
TREMproof 250GC is a one-part, cold fluid-applied, elastomeric-modified polyurethane waterproofing membrane. It features a rapid-curing, VOC-compliant formula with high solids that can be applied to damp/green concrete, reducing delays. Apply it as soon as 24 hours after the removal of concrete forms. It is compatible for use with split slab applications with TREMDrain system components, as well as with vegetated roof applications and planter systems. Apply TREMproof 250GC in a single lift of up to 120-mils for a faster application while still maintaining performance, or in multiple lifts to a thickness of 215-mils for maximum protection. TREMproof 250GC offers three formulas for self-leveling, roller, and trowel application.
This polymer-enhanced, single-component, cold fluid-applied, asphalt emulsion
formula for below-grade use is compatible for use with damp/green concrete, allowing for faster application. It’s available in two formulas for spray and roller application. Co-spray application speeds curing, reducing washout, and ensuring a speedy set in the event inclement weather takes you by surprise.
Tremco Hot Fluid-Applied Waterproofing Systems
The tried and trusted technology of Tremco hot fluid-applied membranes features a one-part, 100% solids, hot rubberized asphalt formulation for vertical and horizontal applications.
TREMproof 6100 is a hot fluid-applied rubberized asphalt waterproofing membrane compatible for use with split slab applications with the TREMDrain system, as well as vegetated roof applications, and planter systems. To create a full system, combine with a reinforcing layer and additional components.
This hot fluid-applied rubberized asphalt is formulated for use with new or remedial waterproofing applications. Ideal for use on surfaces that will be paved or concreted over to carry vehicular traffic.
TREMproof 6145 is a hot fluid-applied rubberized asphalt membrane formulated with the ideal balance of rubbers, asphalt, and inert fillers to impart toughness at a lesser thickness. Part of the Permaphalt System, it is designed for use beneath traffic-bearing asphalt and concrete overlays. It can also be used with split slab applications with TREMDrain system components, and makes an economical solution for exterior parking decks and surfaces coated with traffic-bearing topping courses.
Permaphalt Waterproofing System
An economical solution for traffic-bearing surfaces, the Permaphalt Waterproofing System forms durable, permanent, monolithic protection that requires minimal maintenance. It imparts a heavy-duty, skid-resistant driving surface, featuring a unique composition that guards against damage from snow removal equipment while allowing for easy asphaltic patching and repair. It is best used in outdoor facilities exposed to the elements over occupied areas, and areas over which heavy traffic, such as snow equipment, will pass.
Tremco Sheet-Applied Waterproofing Systems
Tremco sheet applied membranes are ideal for use below-slab-on-grade, on blindside walls, and backfilled walls, both for vertical and horizontal applications.
TREMproof Amphibia is a self-sealing, self-healing waterproofing membrane. In addition to a nonwoven fabric layer that firmly adheres the membrane to concrete, it features three active layers: a watertight EPDM barrier, a core that can reseal when penetrated, and an overlapping barrier that resists the lateral movement of water. Its unique design reduces the need for time-consuming detail work. Ideal for use on below-grade walls, blindside applications, pile caps, grade beams, under-slab, and buried forms. Specially formulated, it allows for longer exposure to weather and can resist aggressive natural ground agents, including saltwater.
TREMproof 500 Series (545/560)
The TREMproof 500 Series offers an ideal all-weather solution. This post-applied, self-adhered sheet membrane features a 20-mil layer of high-performance butyl adhesive for cold climate application, including a double-scrim HDPE membrane with a special weave that enhances its abrasion resistance, ensuring a flat surface and uniformity of thickness throughout. It is compatible for use on green/damp concrete without primer, facilitating faster application, and may be used in back-filled wall applications with TREMDrain components. Exacting manufacturing provides consistent, uniform coverage with high puncture resistance, allowing for the elimination of a protection course. For added thickness and protection, look to TREMproof 545 (45-mil) and TREMproof 560 (60-mil).
Tremco HDPE/Bentonite Waterproofing Systems
Tremco HDPE/bentonite waterproofing solutions feature expandable bentonite. This specialty clay can expand up to eight times its original thickness, thwarting any water that might make it past the system’s high-density polyethylene (HDPE) layer to which it adheres. It is ideal for horizontal, vertical, and lagging applications.
Paraseal sheets feature a 15-mil layer of HDPE with a layer of expandable granular bentonite. Ideal for use in back-filled wall applications with TREMDrain components.
*Saltwater formula also available.
Paraseal Dual Waterproofing System
An excellent choice for blindside waterproofing, use the Paraseal Dual Waterproofing System over green/damp surfaces to speed construction. Also works well for blindside waterproofing and for split-slab, below-slab-on-grade, and back-filled wall applications with TREMDrain system components.
Paraseal LG sheets feature a 20-mil HDPE layer, expandable granular bentonite, and a protective layer of spun-bonded polyester. A fantastic choice for blindside waterproofing. May also be used for split-slab, below-slab-on-grade, and back-filled wall applications with TREMDrain system components.
This sheet waterproofing and methane mitigating protection system features 20-mils of HDPE and expandable granular bentonite. The HDPE layer expands beyond bentonite, creating a clean surface on perimeter edges for compatible tape. Another excellent choice for blindside wall waterproofing.
*Saltwater formula also available.
Paraseal GM/LG 20 Mil
Paraseal GM/LG 20 Mil sheets consist of a 20-mil HDPE layer, expandable granular bentonite, and a protective layer of spun-bonded polyester. The HDPE layer expands beyond bentonite, creating a clean surface on perimeter edges for compatible tape. Once again, an excellent choice for blindside wall waterproofing. Also compatible for use with split-slab and below-slab-on-grade applications with TREMDrain system components.
Paraseal GM/LG 60 Mil
The same benefits as Paraseal GM/LG 20-mil, but with a 60-mil HDPE layer.
Tremco Hybrid Waterproofing Systems
Tremco Hybrid Waterproofing systems are designed to masterfully manage your most demanding waterproofing tasks, offering dual and triple-membrane protection for blindside and under-slab applications.
TREMproof Dual Waterproofing System (DWS)
The TREMproof DWS is designed for tenacious adhesion, long term durability, and chemical stability, withstanding the most rigorous conditions. Cold application minimizes the need for specialized equipment. It can be applied to damp concrete, reducing construction delays, and as soon as 24 hours after the removal of concrete forms. Ideal for waterproofing plaza decks, terraces, planters, backfilled walls, split slabs, as well as vegetated roof applications.
TREMproof Triple Waterproofing System (TWS)
This blindside and under-slab waterproofing assembly features 20 mils of HDPE, expandable bentonite, and a protective layer of spun-bonded polyester, coated with 60 mils of polymer-enhanced, fluid-applied asphalt membrane. It forms a physical bond to concrete, eliminating the potential for lateral water movement between the membrane and structure, providing superior protection against inclement weather by preventing the hydration of bentonite before concrete placement.
Crystalline Waterproofing Systems
Crystalline waterproofing systems offer protection few products can match, allowing for complete negative side waterproofing protection.
Permaquik Crystalline Waterproofing
Tremco’s Permaquik capillary waterproofing system features a proprietary blend of chemicals, quartz sand, and cement. Applied to inside surfaces, it integrates into and combines with concrete, forming an impenetrable barrier. Moisture is required to create the chemical reaction. When combined with free lime, long chemical chains are formed, which crystallize and penetrate deeply into concrete, eliminating water migration. Permaquik Crystalline Waterproofing provides fast, economical coverage for negative side waterproofing in conjunction with a positive side membrane on foundation walls, floors slabs, and pools. Also great for guarding against spalling in parking garage floor applications.
TREMproof PUMA for Below-Grade Waterproofing Systems
TREMproof PUMA waterproofing products feature next-generation technology. Formulated to surmount the limitations of epoxy and urethane systems, they offer a superior option for waterproofing concrete and guarding occupied spaces against water damage. Using polyurethane-methacrylate (PUMA) technology, PUMA waterproofing formulations deliver durable protection with unsurpassed elasticity and crack resistance. PUMA products can be applied in temperatures down to 20F, curing quickly. They are compatible for use with split slab applications with TREMDrain system components, as well as with vegetated roof applications and planter systems.
Asphalt Overlay (PUMA)
This rapid-curing, cold-applied TREMproof PUMA membrane is ideal for use as an asphalt overlay, offering superior elongation and crack bridging compared to traditional MMA/PMMA systems. Use this zero-VOC system for waterproofing protection over concrete slabs, or to protect areas beneath concrete from water damage. Cures with just 30-45 minutes between coats.
*This premium system comes with an industry-leading, all-inclusive warranty.
Flashing System (PUMA)
A quick-cure, liquid, cold applied flashing system. Cures in 30 minutes or less, even in sub-freezing temperatures, allowing for fast installation. Ready for foot traffic in just one hour. Tenaciously adheres to concrete and metal surfaces. It remains easy to repair, with a forgiving application that allows for additional coatings well after curing. Use it to waterproof concrete slabs, penetrations, window flashing, and block trails, or to protect occupied areas beneath from water damage. Also provides added protection against oils, gasoline, antifreeze, deicing salts, chloride, and other chemicals.
This cold-applied, zero VOC formula is perfect for split-slab, paver systems, planters, and living roofs, protecting occupied areas beneath from water damage. It provides extreme durability and superior elongation and crack bridging compared to traditional MMA/PMMA systems.
*This premium system comes with an industry-leading, all-inclusive warranty.
A cold-applied formula with a rapid set time for quick installation. Apply it quickly, with just 30-45 minutes between cure times. It is formulated specially for use with planters, as well as split concrete slabs, protecting areas beneath from water damage. Its unique chemistry easily bridges cracks, allowing for easy repair when necessary. With planters, no root barrier is necessary when applied at greater than minimum thickness.
Decorative Flashing System (PUMA)
The Tremco Decorative Flashing System is a quick-cure, liquid applied system based on PUMA tech. It is designed for use as a replacement for stainless steel flashing, delivering significant labor savings. It manages complex curves and angles with ease, requiring no bending, overlapping, soldering/open seams, or fabrication. It adheres tenaciously to concrete and metal, forming a durable, flexible seal at crucial connection points. Use it for curb-to-curtain wall, curb-to-façade, exposed window flashings, balcony slider doors, deck to door, and more, tinting it to match nearby building materials. Quickly cures within minutes, even in sub-freezing temperatures.
Tremco Waterproofing Accessories
Ensure seamless protection with compatible Tremco waterproofing accessories, including:
- Drainage mats
- Primers and adhesives
- Protection courses
- Reinforcing materials
- And other associated products
ProCoat Systems offers a wide variety of Tremco Tremco commercial sealants and waterproofing products. Talk to one of our knowledgeable building supplies specialists, uncovering the latest Tremco technology for maximizing waterproofing protection or maintaining the schedule on your building project today.
Contact ProCoat about Waterproofing Products